Compact emitter for Doubler Burner lamps, available as Dual Color and single color. For a single Double burner lamp, you would need two emitters. You need an M4 nut for fastening til glass to the emitter, which can be bought seperatly. This also allows you to make combinations of colors and functions, eg. white positionlight in both sides, and also US indicator light in one side. The emitters has a built in seperator, to make the same "double burn" look as the original has, where the newer double burner with built in LEDs do not have the same retro look. They are easy to mount, as the emitter replaces the original bulb holder, that is simply removed. The emitters are fastened through the original holes in the rubber base, the emitters are connected, and the glass is screwed on again. Harness and wire Due to the shape of the emitter, you should use 90 degree cablelugs,. which we sell seperatly, or as a double wire harness, for connecting 2 emitters at the same time. You can use standard cable lugs, but these will be very visible. Consumption: 0,75W Current: 30mA LEDs: 6 x Medium power Potting: Frosted LED PU Voltage: 24V-30V DC
