Pure Silicone 30 is a 2-part, tin-catalysed, condensation curing silicone rubber. Pure Silicone 30 has excellent tear resistance and exhibits low linear shrinkage. Pure Silicone 30 will reproduce fine details and is suitable for industrial and artistic applications. Pure Silicone 30 silicone can be used to cast a variety of materials including wax, gypsum-based polymers, low melt alloys, urethane, epoxy and polyester resins. In some cases, a release agent, such as Mikon F57 aerosol wax, should be used to prolong mould life. Pure Silicone 30 can be accelerated with a small percentage of Pure Silicon Accelerator to reduce the pot life and cure time. The silicone can be thickened with RTV Thixo silicone thixotropic liquid for brush-on applications. Mixing The resin and catalyst components must be measured out accurately using a gram scale. Mix the two components thoroughly, paying attention to the sides and bottom of the container. Do not mix more than can be used within the working time of the system. Part by weight (Silicone resin part A: Catalyst Part B) 100:3 standard speed Part by weight (Silicone resin part A: Catalyst Part B) 100:2 slower speed Delivery: 5 – 7 Business days SPECS & DATA SHEET (E&OE)
