Description A solvent free, slightly thixotropic, toughened epoxy system for composite hand laminations, bonding various substrates, casting/ encapsulating/ coating; with exceptionally high chemical resistance, low vapour transmission properties, good elongation and toughness. Can be filled with fillers to change the viscosity and or properties. Uses A laminating system for composites Manufacturing composite fuel tanks (see resistance table below) A vapour barrier coating for insulation A liquid bonding epoxy adhesive Casting/ encapsulating of electronic components/ boxes Lining of water/ fuel/ oil/ acid tanks (typically with glass fabrics) Laminating of polystyrene blocks and or wood with fibreglass Mixing (resin: hardener) The system should be mixed at the following ratios: Volume 100:50 Weight 100:44 The resin and hardener components must be measured out accurately. Measurement by weight using an electronic scale is recommended. Mix the two components thoroughly, paying attention to the sides and bottom of the container. Do not mix more than can be used within the working time of the system Delivery: 5 – 7 Business days SPECS & DATA SHEET (E&OE)
